Hankison

HPD 750

Hankison HPD Series dryers will produce the design dew point while operating continuously at maximum rated flow (100% duty cycle) at CAGI ADF 200 inlet standards of 100°F inlet temperature and 100% relative humidity at 100 psig.

  • Flow: 750 SCFM
  • Connection: 3"
  • Max Pressure: 150 PSIG
  • Electric: 3/60/460 Standard
  • $19,343.00
Need help? Call us:  1 503 639 0808

Product details

Standard HPD Series (Heated Blower Purge) Desiccant Compressed Air Dryers: -4°F to -40°F Pressure Dew Points.

  • Fulfillment Process
    1. Confirmation - We contact each customer to verify that the equipment purchased fits the application. One of our sales engineers will confirm the voltage, operating pressure and other installation requirements. They also see if you are interested in having a Rogers verified service provider do start-up services for you.
    2. Shipping & Tracking - When your order has been shipped, our shipping department will notify you of the shipping details.
    3. Start-up & Warranty (only if going with a Rogers verified service provider for start-up) - If you decide to go with us or one of our partners for start-up services, they will take care of start-up and warranty validation for you.
    Design

    Designed for applications that were previously forced to accept a –40°F pressure dew point when simple protection against seasonal freezing is the issue. The standard design delivers ISO 8573.1 dew points between Class 2and Class 3 automatically. Class 2 (–40°F) dew points protect against freezing during low ambient conditions and Class 3 (–4°F) dew points keep your air system bone dry during the heat of summer. Applications that require Class 2 (-40°F) dew points year round simply need to select the Free-Air (FA) Supercharger option package

    Energy Management System

    The EMS uses rugged temperature- & humidity-sensing technology that does not require calibration. Constant desiccant bed monitoring ensures stable dew point control. Algorithm-based A3 PurgeTechnology™ controls precisely engage the FA Supercharger when needed to manage the bed regeneration cycles and boost the airflow through the tower. Compressed purge air volume is reduced, further optimizing energy conservation.

    An HPD Series dryer with an EMS package may enable the use of a smaller air compressor. Total system efficiency would then be superior due to the linear energy-saving potential of the dryer. Purge air savings of up to 15% are possible in direct proportion to demand when compared to typical heatless designs. Consistent -40°F pressure dew points and fast returns-on-investment are automatic year round.

  • Rated Flow (SCFM)750
    Connection (in)3
    Dryer TypeDesiccant - Heated Lower Purge
    Power Supply3/60/460
    Rated Inlet Pressure (PSIG)100
    Max Working Pressure (PSIG)150
    Rated Inlet Temp (F)100
    Max Inlet Temp (F)120
  • Is start-up included with my order?No. Start-up is an additional service that you will have the option to add when our sales engineer calls to confirm your order.
    Is shipping actually free?Free shipping is offered in WA, OR, CA, ID, NV, UT, AZ, MT, WY, TX, LA and MS only due to our branch locations.
    How long should I expect the fulfillment process to take?You should expect to be contacted to confirm your order within two (2) business days of submitting your order. After that, the lead time varies based on location.
    Do you sell online to people outside of the continental United States?No, but we can still sell to you if you buy from us direct. Please contact us direct by calling 503-639-0808 or by emailing sales@rogers-machinery.com.
    Can I apply a tax exemption certificate to this purchase?Only if you contact us direct for the sale. We do not provide tax exemptions for online sales.
  • Hankison HPD Series Brochure 

     

Description
Fulfillment Process
  1. Confirmation - We contact each customer to verify that the equipment purchased fits the application. One of our sales engineers will confirm the voltage, operating pressure and other installation requirements. They also see if you are interested in having a Rogers verified service provider do start-up services for you.
  2. Shipping & Tracking - When your order has been shipped, our shipping department will notify you of the shipping details.
  3. Start-up & Warranty (only if going with a Rogers verified service provider for start-up) - If you decide to go with us or one of our partners for start-up services, they will take care of start-up and warranty validation for you.
Design

Designed for applications that were previously forced to accept a –40°F pressure dew point when simple protection against seasonal freezing is the issue. The standard design delivers ISO 8573.1 dew points between Class 2and Class 3 automatically. Class 2 (–40°F) dew points protect against freezing during low ambient conditions and Class 3 (–4°F) dew points keep your air system bone dry during the heat of summer. Applications that require Class 2 (-40°F) dew points year round simply need to select the Free-Air (FA) Supercharger option package

Energy Management System

The EMS uses rugged temperature- & humidity-sensing technology that does not require calibration. Constant desiccant bed monitoring ensures stable dew point control. Algorithm-based A3 PurgeTechnology™ controls precisely engage the FA Supercharger when needed to manage the bed regeneration cycles and boost the airflow through the tower. Compressed purge air volume is reduced, further optimizing energy conservation.

An HPD Series dryer with an EMS package may enable the use of a smaller air compressor. Total system efficiency would then be superior due to the linear energy-saving potential of the dryer. Purge air savings of up to 15% are possible in direct proportion to demand when compared to typical heatless designs. Consistent -40°F pressure dew points and fast returns-on-investment are automatic year round.

Specifications
Rated Flow (SCFM)750
Connection (in)3
Dryer TypeDesiccant - Heated Lower Purge
Power Supply3/60/460
Rated Inlet Pressure (PSIG)100
Max Working Pressure (PSIG)150
Rated Inlet Temp (F)100
Max Inlet Temp (F)120
FAQ
Is start-up included with my order?No. Start-up is an additional service that you will have the option to add when our sales engineer calls to confirm your order.
Is shipping actually free?Free shipping is offered in WA, OR, CA, ID, NV, UT, AZ, MT, WY, TX, LA and MS only due to our branch locations.
How long should I expect the fulfillment process to take?You should expect to be contacted to confirm your order within two (2) business days of submitting your order. After that, the lead time varies based on location.
Do you sell online to people outside of the continental United States?No, but we can still sell to you if you buy from us direct. Please contact us direct by calling 503-639-0808 or by emailing sales@rogers-machinery.com.
Can I apply a tax exemption certificate to this purchase?Only if you contact us direct for the sale. We do not provide tax exemptions for online sales.
Resources
Hankison HPD Series Brochure 

 

Rent product

Interested in renting HPD 750? Please fill in the form below and we will get back to you in the shortest time.

Or call us now:




Phone:
503.639.0808

Let our application engineers advise you on different renting options and terms

Request a quote

Interested in buying HPD 750? Please fill in the form below and we will get back to you in the shortest time.

+ Add comment

Product reviews

See what customers think

Don't miss a thing